Maintenance Tips: Keeping Your Steel Doors Looking New

Steel: The Low Maintenance Choice While steel doors are famous for being "low maintenance," they are not "no maintenance." A little care goes a long way in preserving their finish and functionality.

Cleaning Routine (Every 3-6 Months) 1. **Dusting:** Use a soft microfiber cloth to remove loose dust. 2. **Washing:** Mix a mild detergent (dish soap) with warm water. Wipe down the door surface gently. - *Avoid:* Abrasive scrubbers (steel wool), strong solvents (thinners, acetone), or bleach. These can damage the powder coating. 3. **Rinsing:** Wipe with clean water to remove soap residue. 4. **Drying:** Dry immediately with a soft cloth to prevent water spots.

Hardware Care

• Hinges: Apply a silicone-based lubricant spray (like WD-40 Specialist Silicone) once a year to keep them moving smoothly. Avoid heavy grease which attracts dust.

• Locks: Do *not* put oil inside the key cylinder. If it sticks, use graphite powder.

• Handles: Sanitize regularly. Tighten any loose screws immediately to prevent wear on the mechanism.

Addressing Scratches If the powder coat gets scratched: 1. Clean the area. 2. Apply a touch-up paint (available from FueGuard) that matches the RAL color code of your door. 3. Clear nail polish can seal very minor hairline scratches to prevent rust.

FAQ

Q: My door squeaks. What should I do? A: It's likely the hinges. A quick spray of silicone lubricant usually solves this instantly.

Q: The bottom seal is dragging on the floor. A: Check if debris is stuck under it. If not, the seal might need adjustment. most drop seals have a adjustment screw on the side edge of the door leaf.